Differences

This shows you the differences between two versions of the page.

--- library:bandwidth [2025/06/21 18:49] – scott
+++ library:bandwidth [2026/07/20 13:43] (current) – [Bandwidth in Practice] scott
@@ Line 9: / Line 9: @@
   * Bandwidth is reported as frequencies across the entire image, disregarding FOV and Frequency Matrix
   * When reducing FOV, reduce bandwidth; when increasing FOV, increase bandwidth. This helps keep the chemical shift artifact relatively constant.
-  * Small FOV (13cm) bandwidth: 15-20 kHz
+  * Small FOV (<13cm) bandwidth: 15-20 kHz
-  * Large FOV (24+cm) bandwidth: 31+ kHz
+  * Medium FOV (15-30cm) bandwidth: 20-31kHz
+  * Large FOV (30+cm) bandwidth: 31+ kHz
   * For FSE: Keep the Min TE around 8-12ms
@@ Line 28: / Line 29: @@
 {{:library:rbw_10-63khz_10_.gif|}}
-The images above are of an Axial T2 weighted FSE, with the bandwidth increased from 10 kHz to 63 kHz. Notice that the first low bandwidth (10 kHz) result in quite a blurry image; the echo spacing is long and the chemical shift artifact  is significant. As bandwidth is increased, note how the morphology of the extruded disc appears to change. Also note that the 'bulk' of the patient appears to move within the image; this is the effect of chemical shift across the entire image. Once the 63 kHz bandwidth is reached, the SNR is poor and zipper artifacts appear in the image. When balancing parameters for bandwidth, there is no one size fits all rule. It will be sequence, field strength, and purpose dependent. For a general fast spin echo on a older to mid-age 1.5T scanner, set a frequency matrix appropriate for the body part being imaged, and increase bandwidth to get near ~1 pixel chemical shift/8-10ms echo spacing.
+The images above are of an Axial T2 weighted FSE, with the bandwidth increased from 10 kHz to 63 kHz. Notice that the first low bandwidth (10 kHz) result in quite a blurry image; the echo spacing is long and the chemical shift artifact  is significant. As bandwidth is increased, note how the morphology of the extruded disc appears to change. Also note that the 'bulk' of the patient appears to move within the image; this is the effect of chemical shift across the entire image. Once the 63 kHz bandwidth is reached, the SNR is poor and zipper artifacts appear in the image. When balancing parameters for bandwidth, there is no one size fits all rule. It will be sequence, field strength, and purpose dependent. For a general fast spin echo on a older to mid-age 1.5T scanner, set a frequency matrix appropriate for the body part being imaged, and increase bandwidth to get near ~1 pixel chemical shift/8-12ms echo spacing.