Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
shoulder_mri_guide [2025/01/16 22:21] – [First steps before scanning] meuonshoulder_mri_guide [2025/01/16 23:52] (current) – removed meuon
Line 1: Line 1:
-=====Veterinary Shoulder MRI Guide (v1)===== 
-By: Scott Johnson MS RT (R)(MR)  
  
-====Positioning==== 
- 
-   * Spine Coil 
-   * Side of interest down 
-    Wedge under sternum 
-   * Pull side up forelimb caudally 
-   * Pull side down forelimb cranially until humerus is roughly perpendicular to sternum 
-   * The idea is to get the forelimb in a relatively neutral position 
-      * **PALPATE SHOULDER JOINT** 
-      * **NOTE WHICH COILS THE JOINT IS OVER** 
-   * 34 or 345 etc etc 
- 
-==== First steps before scanning==== 
-    Register patient 
-   - Adjust patient position to be either Left or Right decubitus, depending on side of interest 
-   - Open first scout image 
-   - Change spine coil selection to match the coils you noted inside the room 
-   - APPLY ALL 
-   - When in doubt, choose more coils 
- 
-====Second scout==== 
-1. Open scout 
-2. Maximize image 
-3. Click on ‘report cursor’ 
-4. Scroll through your images to find the shoulder joint on a transverse or a dorsal 
-5. Place cursor within the shoulder joint 
-6. Record the coordinates 
-a. Something like L30 P10 S20 etc 
-b. Will be different every patient 
-7. Input these coordinates with letters into the corresponding start/end points 
-8. Save, prep, scan